Below is a list of the latest materials offered through Architect-Forum. If you wish to view the complete list of courses available click on the Latest Courses link. For any of the courses available click the course title link to view course details, subscribe and go to course or add it to your calendar to complete at a later date.
Architect-Forum reports all AIA completed credits on every Monday of every week.
NEW: 01-16-2017 | Course No: IS0502-W | Narration: No | Videos: Yes | This course provides a comprehensive overview of the variety of guarding products available for use in and around facilities to ensure the safety of pedestrians, valuable machinery, and equipment. This program also reviews applications, installation options, and common product finishes which will assist in making the right decisions for your clients.
NEW: 11-30-2016 | Course No: EB0402-W | Narration: No | In this course, you will discover how clay is transformed into environmentally sound and durable structural ceramic glazed masonry products; and the ASTM testing that make sizes and shapes structurally sound while providing life and property safety. You will learn how structural glazed brick and tile differ from a polymer (plastic) coated CMU (block), as well as how ceramic glazed brick performs in freeze-thaw climates to insure better building safety. The program also reviews cost comparisons, industry nomenclature, applicable ASTM standards and technical data. In addition, you will see a wide variety of buildings and applications.
NEW: 11-22-2016 | Course No: DB0602-W | Narration: No | Provides an overview of Indoor Air Quality, along with a discussion on IAQ health issues associated with Mold and Fungus. The program looks at the causes of Mold and Fungus in today’s structures and examines how specifying MgO products is a great alternative solution to dealing with Mold and Fungus.
NEW: 11-22-2016 | Course No: EW0704-W | Narration: No | In this program we will discuss the differences between EIFS and Stucco and also the compositions and types of EIFS available today and why EIFS has gone through growing pains in the construction industry. At the conclusion of this program you will be able to understand the benefits, applications and performance of an EIFS system.
NEW: 11-22-2016 | Course No: MS1005-W | Narration: No | Provide an overview of how today's showers include Hi-Tech Steam Bathing. The course will teach how steam improves the wellness of life, while providing an understanding of how steam shower systems are properly designed, installed, and how they work.
NEW: 09-09-2016 | Course No: AG3203-W | Narration: No | Present a familiarization with an understanding of UL 325 and ASTM F2200 applicable to automated vehicular gates. This course will educate specifiers to safety standards in the interest of client safety and liability associated with automated vehicular gates.
NEW: 09-07-2016 | Course No: BH0602-W | Narration: No | Getting to the higher levels of green product certification is a highly commendable feat. Platinum requirements, for example must meet all five Cradle to Cradle certification categories: material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. This program will review some considerations for certifications of sustainable products, the 5 categories that are core to a sustainable product strategy and how a manufacturer of bark shingles (a by-product of the wood industry) got to PLATINUM first.
NEW: 05-31-2016 | Course No: GL1402-W | Narration: No | ADA California Compliant | AIA HSW & ADA/Universal Design | We recognize the importance of elevators and lifts in today’s design industry. Lifts and elevators can be an extraordinary feature added to a home or building that will enhance the life quality and safety of the end user. In this program the learner will learn about the requirements for platform lifts, the different types of lifts, and basic product design. Will also gain an understanding of code compliance issues, and how to solve accessibility problems, and solutions for evacuation for persons with disabilities.
NEW: 04-12-2016 | Course No: TY0808-W | Narration: No | Video: Yes | HSW-Yes | Provides an overview of the NEWLY REVISED 2016 UL325 National Standard. The course will guide design professionals on how to properly specify automated vehicular gates and also include important facts to know about UL325 and ASTM F 2200 Standards as they apply to automated gates. The design professional will learn in detail those standards and what to do to protect the firm and client liability.
NEW: 03-26-2016 | Course No: IS0501-W | Narration: No | Videos: Yes | This course provides a comprehensive overview of the variety of guarding products available for use in and around facilities to ensure the safety of pedestrians, valuable machinery, and equipment. This program also reviews applications, installation options, and common product finishes which will assist in making the right decisions for your clients.
NEW: 09-20-2015 | Course No: AAG0801-W | Narration: No | Videos: Yes | Storefront fabrication and delivery is done in two primary ways; stick built transported on glazier work trucks or pre-glazed fabrication followed by jobsite delivery direct from the factory. A majority of framing systems used in the stick built process are flush-glazed, center set weep systems. These systems don’t require any sophisticated equipment. Pre-glazed systems are typically wet seal, non-weep designs. This course is focused on the fabrication, assembly, delivery of hurricane-resistant (impact) storefront and entrance doors. Impact products require additional attention to manufacturing standards due to the safety of structures and occupants within.
NEW: 05-07-2015 | Course No: BH0601-W | Narration: No | Raw extrusions from nature call forth a spirit of connection and authenticity. Used in architectural applications, these materials can either proclaim their presence by defining a space and or by the quieting and soothing of one. Either way, they are distinctly evocative.As alluring as natural materials are, there can be many pitfalls when employing designs that use them because there are few regulatory standards. This can make choosing to work with these materials a leap of faith. Choose only manufacturers and suppliers that are educated in this specific industry and hold their companies to the highest standards. Ensure these companies are capable of working with both designers and builders as to mitigate installation and performance failures.Learn design fundamentals for natural materials that will give beautiful and lasting results.
NEW: 03-17-2015 | Course No: AK0906-W | Narration: Yes | This course provides an overview of the basics of water-based PVDF coatings and how they help attain sustainability goals. The course begins with a brief description of the components of a
weatherable coating, and describes the function of each. Because of its critical role in the weatherability and sustainability properties of water-based PVDF coatings, the chemistry of the carbon-fluoride bond is also described. The unique properties of this technology improve the water penetration into the building envelope improving the safety and welfare of the building and its end users.
NEW: 03-16-2015 | Course No: AK0905-W | Narration: Yes | There are many kinds of resin-based coatings for metal, and two primary application techniques. In this course each of these coatings and application techniques are described and illustrated, along with important information on why these coatings fail and how the performance of these coatings is measured. The primary goal of this course is to provide architects and others who work with resin-based coatings for metal with the information they need to ensure that the coated product will perform as expected and provide a durable and long-lasting finish.
NEW: 03-06-2015 | Course No: TY0807-W | Narration: No | Video: Yes | HSW-Yes
This program will cover why the new ASTM F3016 Standard was developed and what the Bollard design specifier now needs to know to protect their company and customers from low speed vehicle impact liability. Provided is a thorough explanation and overview of how Bollards and other Vehicle Impact Protective Devices are tested under the new national low speed ASTM F3016 Standard and why traditional concrete filled Bollards fail this test method.
Course No: PF0702-W | Narration: Yes | The scope of the presentation includes Sprayed Fire Resistance Materials or SFRM, Spec Section 07 81 00 and Thin Film Fire Resistance Materials, Spec section 07 81 23. SFRM or Passive Fire Protection Components vs Fire Sprinklers which are active Fire Protection Components. They need to be activated by elevated temperatures due to fire.
Course No: SS0501-W | Narration: No | Cold Formed Steel (CFS)is a staple in modern Commercial and Multi-Family building projects. From steel’s unbeatable strength and dimensional stability to it’s non-combustibility and resistance to mold, rot, or warp, CFS is an ideal building material.
Price : Free|LU: 1.0|CEU: .10|HSW: Yes|SD: No|Sponsor: Super Stud Building Products Inc.|About the Sponsor
Welcome to the A-F eLearning System! We are a group of designers working with product manufacturers to educate designers about various product technologies and services. We are an online AIA and IDCEC continuing education provider, offering you various tools such as SCORM compliant continuing education programs, IM, calendar to help you plan your events, the ability to subscribe to a course to take at a later date or to take instantly.
Architect-Forum reports all AIA completed credits to the AIA CES on every Monday of every week.